Comware

 View Only
Back to discussions
Expand all | Collapse all

Enable more SNMP Traps on HPE 5130 EI JG933A switch

This thread has been viewed 2 times

  • 1.  Enable more SNMP Traps on HPE 5130 EI JG933A switch

    Posted Mar 26, 2019 05:49 AM

    Please help me,

    i need to replace Cisco switch to HPE switch.

    in the Cisco Switch config, i found some SNMP Trap features e.g trap for cpu threshold, vlancreate, vlandelete, tranceiver, tty, etc. i can't found this in this HPE comware based command. In the HPE Switch, i only found some SNMP Traps e.g port-security, snmp authentication,etc.

    how to enable other trap features which aren't available on comware based switch?

    do i need to add more MIB files ?

     



  • 2.  RE: Enable more SNMP Traps on HPE 5130 EI JG933A switch

    Posted Apr 01, 2019 08:25 AM

    Hi,

    You can view the available traps that you can enable by executing the command 'snmp-agent trap enable ?' from system-view.

     

    Example:

     

    [SW-A]snmp-agent trap enable ?
      arp            ARP module
      bfd            Enable BFD notifications
      bgp            Enable BGP notifications
      configuration  Enable configuration management notifications
      dhcp           Enable SNMP notifications for DHCP
      event-mib      Enable Event-MIB notifications
      ike            Enable SNMP notifications for IKE
      ipsec          Enable SNMP notifications for IPsec events
      isis           IS-IS module
      l2vpn          Enable L2VPN notifications
      l3vpn          Enable L3VPN notifications
      ldp            Enable LDP notifications
      mac-address    Enable MAC address notification
      mpls           Enable MPLS notifications
      ospf           OSPF module
      ospfv3         OSPFv3 module
      pim            Enable PIM notifications
      pim6           Enable IPv6 PIM notifications
      port-security  Port security module
      radius         RADIUS module
      rrpp           Rapid Ring Protection Protocol(RRPP) module
      spbm           Enable SPBM notifications
      standard       Enable standard SNMP notification
      stp            Enable STP notifications
      syslog         Enable sending syslog messages as SNMP traps
      system         Enable system management notifications
      te             Enable TE notifications
      trill          Enable TRILL notifications
      vrrp           Enable VRRP notifications
      <cr>

    If you are not finding the trap that you are looking, check in the latest release notes if any additional traps are added to the list if your switch version is old.

     



Related Content