SD-WAN

 View Only
  • 1.  False decoder error on provision 3800 KA.15.15.0006

    Posted Aug 02, 2014 01:50 PM

    Hello.

     

    When debug output is activated (3800 KA.15.15.0006):

     

    debug openflow 
    debug destination session

     

    I am receiving errors (but message is processed):

     

    0000:19:07:48.46 OPFL eOFNetTask:RX from tcp:192.168.56.7:6633: 0:
       OFPT_PACKET_OUT (OF 0x04) (xid=0x188e): ***decode error: OFPBRC_BAD_LEN***

     

    I capture packet (xid=0x188e is 6286) (also attached PACKET_OUT.pcapng):

     

    No.     Time               Source                Destination           Protocol Length Info
          1 18:47:54.312709000 192.168.56.7          192.168.56.104        OpenFlow 175    Type: OFPT_PACKET_OUT
    
    Frame 1: 175 bytes on wire (1400 bits), 175 bytes captured (1400 bits) on interface 0
    Ethernet II, Src: 08:00:27:3e:62:f4 (08:00:27:3e:62:f4), Dst: 10:60:4b:38:ec:a5 (10:60:4b:38:ec:a5)
    Internet Protocol Version 4, Src: 192.168.56.7 (192.168.56.7), Dst: 192.168.56.104 (192.168.56.104)
    Transmission Control Protocol, Src Port: 6633 (6633), Dst Port: 59053 (59053), Seq: 1, Ack: 1, Len: 109
    OpenFlow 1.3
        Version: 1.3 (0x04)
        Type: OFPT_PACKET_OUT (13)
        Length: 109
        Transaction ID: 6286
        Buffer ID: OFP_NO_BUFFER (0xffffffff)
        In port: OFPP_CONTROLLER (0xfffffffd)
        Actions length: 16
        Pad: 000000000000
        Action
        Data
            Ethernet II, Src: 10:60:4b:38:ec:be (10:60:4b:38:ec:be), Dst: 01:1b:78:e9:7b:cd (01:1b:78:e9:7b:cd)
            Link Layer Discovery Protocol

     

    I check specification ("OpenFlow Switch Specification Version 1.3.1 (Wire Protocol 0x04)" appendix A), but cannot find any error :-(

     

    - TCP len = 109

    - OF len = 109 = 24 (struct ofp_packet_out) + 16 (struct ofp_action_output) + data 69 (14 (L2 header) + 55 (LLDP))

     

    Is it the minor bug (only debug output bug) in firmware or something is bad ?

     

    Thanks, Martin Cerveny

     



  • 2.  RE: False decoder error on provision 3800 KA.15.15.0006

    Posted Aug 08, 2014 03:09 PM

    Hello Martin Cerveny,

    Thanks for your query.
    We will get back to you shortly.

    Thanks,
    HP SDN Team



  • 3.  RE: False decoder error on provision 3800 KA.15.15.0006

    Posted Oct 07, 2014 03:27 PM

    Hello,

     

    Can you please send the full debug output from the switch - starting at the creation of the flow.

    Keep the same debug switches that you used.

     

    And can you also include a wireshark capture of that same test?

     

    Thank you,

     

    Scott

     



  • 4.  RE: False decoder error on provision 3800 KA.15.15.0006

    Posted Oct 07, 2014 03:58 PM

    Hello.

     

    The same packet is captured by wireshark & switch debug output (no mode erros show) & packet trace by SDN VAN CTLR added in original post. I will not setup test enviroment near feature.

     

    M.C>