Wired Intelligent Edge

Dear All,

I have 2 Procurce switches that i need to upgrade to the latest firmware and BootROM.

3500yl-48G(J8693A)

running firmware: K.15.04.0007,ROMK.15.13

desidered firmware: YA.15.16.0005

 2530-48G-PoEP Switch(J9772A)

running firmware: YA.15.10.0003, ROM YA.15.09

desidered firmware: YA.15.16.0005

Can I upgrete them directly, or I need some specific procedures?

Can you suggest me a simple way to upgrade them (I'm really new in this...)

Thanks a lot for your attencion!!!

If you have a TFTP or SFTP server in your network, you can copy the new firmware to the switch by CLI:

copy tftp flash <ip addr of tftp server> <file name> primary

And then reload when the transfer is finished.

Otherwise, you can connect to the web interface of the switch and upgrade from there (System->Updates).

Hi Terej, thanks a lot for your reply!

Is it safe to move from so old firmare directly to the latest ones?

3500yl-48G(J8693A)

running firmware: K.15.04.0007,ROMK.15.13

desidered firmware: YA.15.16.0005

 2530-48G-PoEP Switch(J9772A)

running firmware: YA.15.10.0003, ROM YA.15.09

desidered firmware: YA.15.16.0005

so my question was more related to the different versions...any advice on this?

many thanks

Follow the version release notes and your your desired code release. 

For K.15.16.0005:

If your software version is K13.58 or newer (BootROM K.12.17 or newer; use show flash command) you can then update directly into software version K.15.16.0005 (BootROM K.15.30).

Relaease notes are attached.

Attachment(s)

K.15.16.0005 RELEASE NOTES.pdf   703 B 1 version

hi robhaviland,

thanks a lot for the info, I'll check using the show flash  command and then upgrade

all the best!