Controllerless Networks

Hi,

When deploying WiFi networks with ARM, it automaticly changes the channel withing the allowed channels. 

Is it possible in a cluster to force ARM to scan again and optimize it immidietly?

 I;m also curious what the time is between the automatic optimizations when Client Aware is disabled.

What we want to accomplisch is, is that when we are done deploying we want to do a Site Survey afterwards, but we need to be sure ARM is finished with the first adjustment when all AP's are installed.

Does anyone have some advice in this?

Thanks

AirMatch supports forcing a new solution be deployed, but not ARM.  ARM is going to be operating dynamically all the time and individual changes will be dependent on the thresholds being hit.

Best option is to allow ARM to settle for ~24 hours before attempting a survey.

------------------------------
Carson Hulcher, ACEX#110
------------------------------

you can also change the max/min Tx power for 2.4/5G to influence ARM to operate within that range.

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Original Message:
Sent: Jun 17, 2024 02:26 PM
From: chulcher
Subject: Forcing new channel optimization with ARM

AirMatch supports forcing a new solution be deployed, but not ARM.  ARM is going to be operating dynamically all the time and individual changes will be dependent on the thresholds being hit.

Best option is to allow ARM to settle for ~24 hours before attempting a survey.

------------------------------
Carson Hulcher, ACEX#110
------------------------------

Thanks

Original Message:
Sent: Jun 18, 2024 02:00 AM
From: ariyap
Subject: Forcing new channel optimization with ARM

you can also change the max/min Tx power for 2.4/5G to influence ARM to operate within that range.

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------


Original Message:
Sent: Jun 17, 2024 02:26 PM
From: chulcher
Subject: Forcing new channel optimization with ARM

AirMatch supports forcing a new solution be deployed, but not ARM.  ARM is going to be operating dynamically all the time and individual changes will be dependent on the thresholds being hit.

Best option is to allow ARM to settle for ~24 hours before attempting a survey.

------------------------------
Carson Hulcher, ACEX#110

Thanks, will do that.

Original Message:
Sent: Jun 17, 2024 02:26 PM
From: chulcher
Subject: Forcing new channel optimization with ARM

AirMatch supports forcing a new solution be deployed, but not ARM.  ARM is going to be operating dynamically all the time and individual changes will be dependent on the thresholds being hit.

Best option is to allow ARM to settle for ~24 hours before attempting a survey.

------------------------------
Carson Hulcher, ACEX#110
------------------------------