Wired Intelligent Edge

Good day all. 

I need to Forward Switch 5406Rzl2 events to an external Syslog server.

I already have this commands:

logging my.syslog.server
logging severity info

but there's no information getting logged on the Syslog server. 

Can you help me out?

Thanks a lot.

Do you have DNS resolving set up if you are using a domain name for the log server?

I just have the command:

logging 192.168.2.50

and I see logs coming in.

Can you ping/reach your syslog server on the name that you configured?

If you have a stable network, it may be that you don't see so many messages. Port up/down you should see.

When you do a 'show log -r' on the switch, do you see more messages there? What type of messages did you miss? In that show log output you can also see the severity in the first column.

check below commands on switch

# show syslog statistics

# show debug

# show running-config | include logging  (in my switch I configured below stats)

logging 10.0.1x0.xx
logging 10.0.1x0.xx
logging severity error
logging system-module chassis
logging command

Ok I ran some tests, if I code in: logging severity debug, the switch does not take the command, but If I enter any of the other levels, the command appears like below, but does not send any traffic to Syslog.
logging 000.000.000.000
logging severity info

If I just leave this:

logging 000.000.000.000

I can see logs coming in but only from the Stacks.

I am unable to see any traffic coming from the Core Switches.

Could it be some rule or ACL on the Core Switch Itself.

Thanks a lot.