Network Management

 View Only
Back to discussions
Expand all | Collapse all

GNS3 ArubaOS-CX Virtual.10.07.0004

This thread has been viewed 18 times

  • 1.  GNS3 ArubaOS-CX Virtual.10.07.0004

    Posted Sep 28, 2025 07:15 AM
      |   view attached

    When I try to apply access-list on a vlan in 10.7 switch version, the switch stops to function and only fix is to remove the access-list and then reboot the switch.

    Support will be highly appreciated.When I try to apply access-list on a vlan in 10.7 switch version, the switch stops to function and only fix is to remove the access-list and then reboot the switch.

    Support will be highly appreciated.

    config attached



    -------------------------------------------

    Attachment(s)

    txt
    CoreSW config.txt   1 KB 1 version


  • 2.  RE: GNS3 ArubaOS-CX Virtual.10.07.0004

    Posted Sep 29, 2025 05:59 AM

    Hi,

    AOS-CX 10.07.0004 appears to have encountered a known bug ((Layer-2) caused by a software error observed when applying ACL. The following situation is recorded in the 10.07 branch: If you apply the VLAN ACL in the "in" direction (via REST/WebUI), the switch may crash/freeze. This issue has been resolved in version 10.07.0030, as shared in the link below. 
    https://arubanetworking.hpe.com/techdocs/AOS-CX/Consolidated_RNs/HTML-6100/Content/10_07/10_07_0030/10-07-0030_f.htm?
    Could you please perform the update and check again?
    -------------------------------------------



Related Content