Hi All
I need to remove a switch and re-configure for another location. However it means repatching some servers which should'nt be an propblem but i have discovered something on the config i dont understand. Below is the config, just need some info on the ports A1-A2 and B1-B2 which are untagged on vlan 1. Are these some sort of virtual ports, other type of interface ports or related to OOBE? greatful for any help. Thanks
Running configuration:
; J9726A Configuration Editor; Created on release #WB.15.16.0005
; Ver #06:0c.fc.f3.ff.35.0d:c2
hostname "HP24L3GBSpare"
module 1 type j9726a
console idle-timeout 600
console idle-timeout serial-usb 600
trunk 9-10 trk5 lacp
trunk 11-12 trk6 lacp
trunk 15-18 trk8 lacp
trunk 21-22 trk10 lacp
qos type-of-service diff-services
qos type-of-service diff-services 101110 dscp 101110
ip default-gateway ##.##.##.##
snmp-server community "#####" operator
oobm
ip address dhcp-bootp
exit
vlan 1
name "DEFAULT_VLAN"
untagged 1-8,13-14,19-20,23-24,A1-A2,B1-B2,Trk5-Trk6,Trk8,Trk10
ip address 192.168.169.99 255.255.255.0
exit
vlan 171
name "desktops171"
no ip address
exit
spanning-tree
spanning-tree Trk5 priority 4
spanning-tree Trk6 priority 4
spanning-tree Trk8 priority 4
spanning-tree Trk10 priority 4
spanning-tree priority 1 force-version rstp-operation
no tftp server
no autorun
no dhcp config-file-update
no dhcp image-file-update
password ######