Comware

 View Only
Back to discussions
Expand all | Collapse all

How to check if QoS is enable - HP A5500 EI

This thread has been viewed 0 times

  • 1.  How to check if QoS is enable - HP A5500 EI

    Posted Jan 30, 2019 08:16 AM

    Hello HPE forum, I am working on replacing old switches in a new environment and these switches have an old configuration that I have no idea if it is still working.

    Here is a sample configuration:
    acl number 3001
     description BLOQUEIO_PADRAO
     rule 1 deny ip destination 10.0.0.0 0.255.255.255
     rule 2 permit udp destination 10.4.9.20 0 destination-port eq dns
     rule 3 permit tcp destination 10.4.9.20 0 destination-port eq domain
     rule 4 permit udp destination 10.4.9.21 0 destination-port eq dns
     rule 5 permit tcp destination 10.4.9.21 0 destination-port eq domain
     rule 6 permit icmp destination 10.4.2.0 0.0.0.255
    #
    acl number 3997
     rule 0 permit ip dscp ef
     rule 1 permit tcp destination-port eq www
     rule 2 permit udp destination-port eq snmp
     rule 3 permit udp destination-port eq snmptrap
     rule 4 permit ip dscp cs6
     rule 5 permit ip dscp cs7
    #
    acl number 4999
     rule 0 permit type 8868 ffff
     rule 1 permit source 00e0-bb00-0000 ffff-ff00-0000
     rule 2 permit source 0003-6b00-0000 ffff-ff00-0000
     rule 3 permit source 00e0-7500-0000 ffff-ff00-0000
     rule 4 permit source 00d0-1e00-0000 ffff-ff00-0000
     rule 5 permit source 0001-e300-0000 ffff-ff00-0000
     rule 6 permit source 000f-e200-0000 ffff-ff00-0000
     rule 7 permit source 0006-b900-0000 ffff-ff00-0000
     rule 8 deny dest 0000-0000-0000 ffff-ffff-ffff
    #
    qos-profile default
     packet-filter inbound link-group 4999 rule 8
     traffic-priority inbound ip-group 3997 rule 0 cos voice
     traffic-priority inbound ip-group 3997 rule 4 cos network-management
     traffic-priority inbound ip-group 3997 rule 5 cos network-management
     traffic-priority inbound link-group 4999 rule 0 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 1 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 2 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 3 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 4 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 5 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 6 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 7 dscp ef cos voice
    qos-profile bloqueio
     packet-filter inbound ip-group 3001 rule 1
     packet-filter inbound ip-group 3001 rule 2
     packet-filter inbound ip-group 3001 rule 3
     packet-filter inbound ip-group 3001 rule 4
     packet-filter inbound ip-group 3001 rule 5
     packet-filter inbound ip-group 3001 rule 6

    and here the configuration of interfaces:

    #
    interface Ethernet1/0/3
     stp edged-port enable
     port link-type trunk
     port trunk permit vlan 1 5 99
     broadcast-suppression pps 3000
     description WIFI
     apply qos-profile default
    #
    interface Ethernet1/0/4
     stp edged-port enable
     port link-type trunk
     port trunk permit vlan 1 5 99
     broadcast-suppression pps 500
     undo jumboframe enable
     apply qos-profile default

    #
    interface Ethernet1/0/18
     poe enable
     stp edged-port enable
     broadcast-suppression pps 500
     port access vlan 333
     undo jumboframe enable
     apply qos-profile default
     apply qos-profile bloqueio

    I have to wonder if these qos are still working because I'm going to have to replace the whole configuration for the new switches, but I do not want to copy the unnecessary configuration.

    Thanks for help!

     



  • 2.  RE: How to check if QoS is enable - HP A5500 EI

    Posted Jan 31, 2019 10:01 AM

    Hello LuixEduardo_BR

    You may please use below guide for qos configuration

    https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=5202306&docLocale=en_US&docId=emr_na-c02644504&withFrame



Related Content