Hi all,
I tested WIP feature with protect valid SSID on my testing LAB but some client still connect to interfering AP which config as the same SSID in my test system.
I'm running in 6.1.3.2 and below is some configuration
IDS Unauthorized Device Profile "Rogue-contain"
-----------------------------------------------
Parameter Value
--------- -----
Detect Adhoc Networks false
Protect from Adhoc Networks false
Detect Windows Bridge true
Protect Windows Bridge false
Detect Wireless Bridge false
Detect Devices with an Invalid MAC OUI false
MAC OUI detection Quiet Time 900 sec
Wireless Bridge detection Quiet Time 900 sec
Rogue AP Classification true
Overlay Rogue AP Classification true
OUI-based Rogue AP Classification true
Propagated Wired MAC based Rogue AP Classification true
Valid Wired MACs N/A
Allow Well Known MAC N/A
Rogue Containment false
Suspected Rogue Containment false
Suspected Rogue Containment Confidence Level 60
Protect Valid Stations false
Detect Station Association To Rogue AP true
Detect Bad WEP false
Detect Misconfigured AP false
Protect Misconfigured AP false
Detect Valid SSID Misuse true
Protect SSID true
Privacy false
Require WPA false
Detect Unencrypted Valid Clients true
Unencrypted Valid Client Detection Quiet Time 900 sec
Valid 802.11g channel for policy enforcement N/A
Valid 802.11a channel for policy enforcement N/A
Valid MAC OUIs N/A
Valid and Protected SSIDs cppm2-onguard
Protect 802.11n High Throughput Devices false
Protect 40MHz 802.11n High Throughput Devices false
Detect Active 802.11n Greenfield Mode false
Detect Adhoc Network Using Valid SSID true
Adhoc Network Using Valid SSID Quiet Time 900 sec
Detect Valid Client Misassociation true
============================
thanks in advance,
PS. I have dedicate AM in my test system