Comware

 View Only
Back to discussions
Expand all | Collapse all

How to save running config on HP V1910-24G switch?

This thread has been viewed 1 times

  • 1.  How to save running config on HP V1910-24G switch?

    Posted Mar 05, 2015 09:42 AM

    Hello.

    I use console for access. Then _cmdline-mode on and make some configuration changes.

    How can i save those changes? I use "?" in user and system-view mode, but nothing seems as "write memory" command for me.

    Please help.

     

     

    P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - Hp forum Moderator



  • 2.  RE: How to save running config on HP V1910-24G switch?

    Posted Mar 05, 2015 08:17 PM

    "Save config"?

     

    It's a shame the H3C commands aren't as sensible as the Procurve ones, which are much better.



  • 3.  RE: How to save running config on HP V1910-24G switch?

    Posted Mar 06, 2015 01:44 AM

    Thank you!

     

    <HP V1910 Switch>save ?
  STRING  The name of specific file(*.cfg)
  backup  Backup config file
  main    Main config file
  safely  Save current configuration safely
  <cr>

<HP V1910 Switch>save
The current configuration will be written to the device. Are you sure? [Y/N]:Y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):flash:/startup.c
fg
 Validating file. Please wait....
 Configuration is saved to device successfully.
<HP V1910 Switch>

     



Related Content