Network Management

My HP switch 1910-48 JG540A won't boot . i've tried to reset it but i get this answer : 

Password recovery capability is enabled. To perform this operation, first

disable the password recovery capability using the undo password-recovery

enable command in CLI.

so i put "Skip Current System Configuration " and i reboot i get this answer :

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--flash:/JG540A-CMW520-R1106.bin!..

............................................................................

.................

The main application file is invalid!

Starting to get the backup application

file--flash:/JG540A-CMW520-R1106_bak.bin!

The backup application file does not

exist--flash:/JG540A-CMW520-R1106_bak.bin!

Starting to get the secure application file--flash:/secure.bin!

The secure application file does not exist--flash:/secure.bin!

Booting App fails!

i want to update the firmware but i I can't find the firmware on the website .

https://h10145.www1.hpe.com/support/SupportLookUp.aspx

can some one help me please ?!

Thanks

Hello

Last firmware version is R1519P06

It's downloadable from Aruba Support Portal : https://asp.arubanetworks.com

(Create an account if needed, to access 

The Release Notes describe the method for upgrading software from Boot ROM menus (Appendix B, you will need a TFTP server on your machine)

Hello,

Thank you for your feedback.

do you have a tutorial to follow to update the firmware please knowing that I can't access through the console only?!

Thank you