Wireless Access

I have instaled a small wireless network with a 3com wireless Ccable/DSL Gateway and two notebooks connected wich works fine. To access the printer a hp psc 750 all in one, i bought a hp 380x pront server. To configure it, i had to swich off the access point. I can execute the step one to configure it in infrastructure mode using DHCP without authentication and without encryption. After configuration I assume that th prinserver will go in contact with the gateway using a ip address from its pool, but the print server is just blinking, no connection is established. Am I wrong in thinking or is the printserver not working properly?

Think it needs to know that it needs to use DHCP. Try rebooting it. That should trigger it to look for the DHCP server assuming you did not assign it an IP address when you configured it.

Ron