Wireless Access

Hi New to this, I bought 3 refurbished Aruba AP325 of ebay and have powered one on, it just seems to cycle again and again and does not show the Wifi ssid SetMeUPXXXXXX. when consoled into the AP it shows there is an OS on partition 1 but not on Partition 0. It picks up and Ip address but i cannot seem to Browse it with a web browser.I tried setting the partition to partion 1 but still it did not boot up. i can break out to the apboot screen to set the env values but they still don't boot up. Any Help on how to apply the OS to partition 0 or any assistance would be greatly appreciated.

-------------------------------------------

You may have bought a campus AP-325. You can check that at the back if there is a sticker with AP-325-RW AP-325-US or AP-325-something else, then it's an Instant AP that should broadcast the SetMeUP (or instant for old versions) SSID. If it's just AP-325, you have a campus AP that needs a controller and you'd better return it to the seller if you don't have a controller.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------