Dears,
I have HP comware JG937A 5130 switch and need to connect polycom phones.
the phones didnt get voice vlan auto and keep working on native vlan only
i am using lldp and below two configuration on two different ports but both not working, Any Idea ?
data vlan 2 - voice vlan 3
Global Configuration:
Use the first part of the MAC address of the Lync phones
===================
voice-vlan mac-address 0008-2100-0000 mask ffff-ff00-0000 description Lync-phones
Configuration for IP Telephony port - A port connected to
IP phone vlan 3 or end User vlan 2 or both together vlans 2 and 3
===============================
Option A – Trunk Port
==================
interface GigabitEthernet1/0/X
poe enable
port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 3
port trunk pvid vlan 2
undo voice-vlan mode auto
voice-vlan 3 enable
stp edged-port
lldp compliance admin-status cdp txrx
#
Option A – Hybrid Port
==================
interface GigabitEthernet1/0/X
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 2 untag
port hybrid pvid vlan 2
undo voice-vlan mode auto
lldp compliance admin-status cdp txrx
voice-vlan 3 enable
poe enable
stp edged-port
#