Hi Raymond,
we have a rp7400 PARISC with a HP A4926A PCI 1000Base-SX Adapter conect to the LAN that manage DTCs in our hospital.
Previus, we have a K260 with a 10 Mb/s card.
Now we are working fine.... but, if I disconnect the UTP cable of the K260... commands like dtcreset don´t work.
The K260 10 Mb/s card is not configured.
We put network traces and don´t see any traffic in this link when use dtc-commands.
HP support don´t explain this... but we can work with our wonderfull VT terminals.
Hope this