Wireless Access

 View Only
  • 1.  IAP-205 Firmware

    Posted Apr 08, 2025 04:30 PM

    I am reaching out for assistance regarding an issue I am experiencing with one of our Aruba access points, model IAP-205.

    When I connect to the device via console, it consistently boots into apboot mode rather than starting up normally. Based on my understanding, this indicates that the firmware might be missing or corrupted, and that I need to upload the appropriate firmware file to restore proper functionality.

    However, I have been unable to locate the correct firmware file specifically for the IAP-205 model. I would appreciate your guidance or direct support in obtaining the correct firmware version and the recommended procedure to load it onto the device.

    Thank you in advance for your help. Looking forward to your response.

    Best regards,
    Mert

    mertcansu0431@gmail.com



  • 2.  RE: IAP-205 Firmware

    Posted Apr 08, 2025 04:34 PM

    You're looking for the taurus images. You can upgrade partition 0/1 from apboot with the following commands:
    upgrade os 0 <tftp server>:<image path>
    upgrade os 1 <tftp server>:<image path>




  • 3.  RE: IAP-205 Firmware

    Posted Apr 08, 2025 05:45 PM

    Keep in mind that all IAP platforms supported by the taurus image have already reached end of support.



    ------------------------------
    /Onno Harms
    Wireless Platforms Product Management
    HPE Aruba Networking
    ------------------------------