Controllerless Networks

 View Only

  • 1.  IAP 275 - power requirement, is POE 30Watt enough?

    Posted Feb 17, 2015 12:57 AM

    Hi ,

    I am planning to install IAP 275 outdoor AP. A dell N 2024P swicth with POE output of 30.8 watts be able to bring the IAP 275 up?

     

    I will connect 18 IAP 275 to this 24 port POE switch, will there be any issues?

    Or Do i need to order external power supply for these IAP 275?

     

    Thanks in Advance for the help.



  • 2.  RE: IAP 275 - power requirement, is POE 30Watt enough?

    Posted Feb 17, 2015 01:24 AM
    http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/Dell_Networking_N2000_Series_SpecSheet_EN_1_0.pdf

    The switch appears to be 802.3at compliant which means the AP-270 series will work properly with the switch. Be sure to enable LLDP as its used to negotiate power.


  • 3.  RE: IAP 275 - power requirement, is POE 30Watt enough?

    Posted Feb 17, 2015 01:27 AM

    Thank you for the reply.

    appreciated.



  • 4.  RE: IAP 275 - power requirement, is POE 30Watt enough?

    Posted Feb 21, 2015 05:04 PM

    According to the datasheet , your switch has the ability to supply your 18 AP.

    It is very important to pay attention to the Switch power Budget , sometimes even when the switch is 802.3at, it does not have enough energy to power all the terminals



Related Content