Wireless Access

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------

SSH into an AP with the issue and type "show log system" and see if there are any errors.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: Feb 15, 2022 03:03 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------

only thing which bothers me is: Incorrect format for message type 0:0:1:0:192.168.250.13:15200.
This warning is for every AP which is not showing up properly...

------------------------------
Raffael Hotz
------------------------------

Original Message:
Sent: Feb 15, 2022 03:32 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

SSH into an AP with the issue and type "show log system" and see if there are any errors.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 03:03 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------

For every AP that is not showing up properly, can you type "

show cluster-security peers

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: Feb 15, 2022 04:02 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

only thing which bothers me is: Incorrect format for message type 0:0:1:0:192.168.250.13:15200.
This warning is for every AP which is not showing up properly...

------------------------------
Raffael Hotz

Original Message:
Sent: Feb 15, 2022 03:32 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

SSH into an AP with the issue and type "show log system" and see if there are any errors.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 03:03 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------

i issued the command on every ap, even the master and the virtual controller and it does not show any peer at all
"sh cluster bss-table"  on the master shows every AP with the ssid but on the other APs only themself

------------------------------
Raffael Hotz
------------------------------

Original Message:
Sent: Feb 15, 2022 04:40 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

For every AP that is not showing up properly, can you type "

show cluster-security peers

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 04:02 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

only thing which bothers me is: Incorrect format for message type 0:0:1:0:192.168.250.13:15200.
This warning is for every AP which is not showing up properly...

------------------------------
Raffael Hotz

Original Message:
Sent: Feb 15, 2022 03:32 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

SSH into an AP with the issue and type "show log system" and see if there are any errors.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 03:03 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------

Can you check the clocks on all APs?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: Feb 15, 2022 04:52 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

i issued the command on every ap, even the master and the virtual controller and it does not show any peer at all
"sh cluster bss-table"  on the master shows every AP with the ssid but on the other APs only themself

------------------------------
Raffael Hotz

Original Message:
Sent: Feb 15, 2022 04:40 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

For every AP that is not showing up properly, can you type "

show cluster-security peers

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 04:02 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

only thing which bothers me is: Incorrect format for message type 0:0:1:0:192.168.250.13:15200.
This warning is for every AP which is not showing up properly...

------------------------------
Raffael Hotz

Original Message:
Sent: Feb 15, 2022 03:32 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

SSH into an AP with the issue and type "show log system" and see if there are any errors.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 03:03 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------

Original Message:
Sent: 2/15/2022 4:58:00 AM
From: cjoseph
Subject: RE: IAP Cluster not working properly

Can you check the clocks on all APs?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: Feb 15, 2022 04:52 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

i issued the command on every ap, even the master and the virtual controller and it does not show any peer at all
"sh cluster bss-table"  on the master shows every AP with the ssid but on the other APs only themself

------------------------------
Raffael Hotz

Original Message:
Sent: Feb 15, 2022 04:40 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

For every AP that is not showing up properly, can you type "

show cluster-security peers

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 04:02 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

only thing which bothers me is: Incorrect format for message type 0:0:1:0:192.168.250.13:15200.
This warning is for every AP which is not showing up properly...

------------------------------
Raffael Hotz

Original Message:
Sent: Feb 15, 2022 03:32 AM
From: Colin Joseph
Subject: IAP Cluster not working properly

SSH into an AP with the issue and type "show log system" and see if there are any errors.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Feb 15, 2022 03:03 AM
From: Raffael Hotz
Subject: IAP Cluster not working properly

Hello guys,
I have a strange issue which Ive never encountered before. When I set up my IAP cluster (AP 275, 8.6.0.16) it looks like everything is normal. 6 APs in there, I can connect to 4 of them and i jump to the master (which is right) and I see 6 APs there. But when I connect to the other 2 APs, I only see themself in the dashboard adn the virtual controller IP. I dont see the other APs and master is 0.0.0.0...From the master I can reboot all of them, I can update... and when I am on one AP which doesnt show the "master ip", the configuration is exactly the same - allowed aps showing all 6. It even shows the same cluster-name on the top.

I really dont get it.

All of them are right in same subnet, same switch.  I resettet them a couple of times but doesnt help. ​Well I now tried to go back to 8.5., but it didnt change.

Have you guys ever seen this behaviour before?

Thanks


------------------------------
Raffael Hotz
------------------------------