Hi,
I have noticed something... sometimes, IAPs reboot after master election:
Nov 20 09:04:50 KERNEL(AP-7629@172.31.16.11): [ 48.788847] ip_time_handler: Got ip and packets on bond0 Started master election 185-0, rand 20
Nov 20 09:04:50 KERNEL(AP-7629@172.31.16.11): [ 49.586816] (08:00:37) !!! Init ---> Slave
Nov 20 09:04:50 KERNEL(AP-7629@172.31.16.11):
Nov 20 09:04:50 KERNEL(AP-7629@172.31.16.11): [ 83.778038] Completed Kernel HMAC SHA1 FIPS KAT
Nov 20 09:04:50 syslog: <341005> <ERRS> |AP AP-7629: | terminal access is enabled but sshd is not running, starting
Nov 20 09:04:52 KERNEL(AP-7629@172.31.16.11):
Nov 20 09:04:52 KERNEL(AP-7629@172.31.16.11): [ 85.700843] Completed Kernel HMAC SHA256 FIPS KAT
Nov 20 09:04:53 nanny[3765]: <303022> <WARN> |AP AP-7629: | Reboot Reason: AP rebooted caused by cold HW reset(power loss)
Another IAP, the same day:
Nov 20 16:23:53 KERNEL(AP-7628@172.31.16.13): [ 49.860637] ip_time_handler: Got ip and packets on bond0 Started master election 149-0, rand 17
Nov 20 16:23:53 KERNEL(AP-7628@172.31.16.13): [ 49.988191] (08:00:36) !!! Init ---> Slave
Nov 20 16:23:53 syslog: <341005> <ERRS> |AP AP-7628: | terminal access is enabled but sshd is not running, starting
Nov 20 16:23:53 KERNEL(AP-7628@172.31.16.13): [ 84.544611] Starting Kernel HMAC SHA1 FIPS KAT ...
Nov 20 16:23:53 KERNEL(AP-7628@172.31.16.13): [ 84.589034] Completed Kernel HMAC SHA1 FIPS KAT
Nov 20 16:23:55 KERNEL(AP-7628@172.31.16.13):
Nov 20 16:23:55 KERNEL(AP-7628@172.31.16.13): [ 86.597656] Completed Kernel HMAC SHA256 FIPS KAT
Nov 20 16:23:55 nanny[3813]: <303022> <WARN> |AP AP-7628: | Reboot Reason: AP rebooted caused by cold HW reset(power loss)
I don't understand the "power loss" message, there is no errors on the switch (HP 5130 PoE HI).
On the switch, cable test is ok on both:
[SW-02-GigabitEthernet3/0/7]virtual-cable-test
Cable status: normal, 45 metre(s)
[SW-02-GigabitEthernet3/0/8]virtual-cable-test
Cable status: normal, 72 metre(s)
I'm running firmware 6.5.4.13 (MODEL: 315).
Can you help me?
Thank you