Wireless Access

 View Only
Expand all | Collapse all

Image version mismatch on AP 103 after controller firmware upgrade.

This thread has been viewed 21 times
  • 1.  Image version mismatch on AP 103 after controller firmware upgrade.

    Posted Feb 15, 2020 08:24 PM

    Hi everbody.
    After upgrading controller firmware from 6.5 to 8.6 some APs model 103 can't to successfully load.
    These APs periodically upgrade firmware, booted, go down, and again do upgrade.
    I can periodically ping them, view on controller via 'show ap database'.

    Under log I can see next error messages.
    So, is it a way to recover these APs?

    Feb 16 03:45:08 stm[3680]: <399803> <3680> <ERRS> |stm| An internal system error has occurred at file sapm_ap_mgmt.c function sapm_proc_hello_req line 19376 error AP: ap-01-01 image version mismatch. bootfile is mips32.ari, build string is ArubaOS version 6.5.4.1 for 10x (p4build@rhodes) (gcc version 4.3.3) #61494 Mon Sep 18 19:36:05 PDT 2017.

    Feb 16 03:45:51 sapd[1124]: <311002> <WARN> |AP ap-01-01@10.77.219.200 sapd| Rebooting: SAPD: Reboot after successful image upgrade

    Feb 16 03:47:23 KERNEL(ap-01-01@10.77.219.200): uol_init_driver:392 HW offload not applicable, AP will use cutting through path!

    Feb 16 03:47:26 nanny[1187]: <303022> <WARN> |AP ap-01-01@10.77.219.200 nanny| Reboot Reason: AP rebooted Fri Dec 31 16:02:31 PST 1999; SAPD: Reboot after successful image upgrade

    Feb 16 03:50:38 nanny[1100]: <303022> <WARN> |AP ap-01-01@10.77.219.200 nanny| Reboot Reason: AP rebooted Fri Dec 31 16:02:35 PST 1999; SAPD: Reboot after successful image upgrade



  • 2.  RE: Image version mismatch on AP 103 after controller firmware upgrade.

    Posted Feb 16, 2020 07:06 AM

    Are you certain that there is not an ArubaOS 6.x network that your access points are being redirected to, in your ap-group in your ap system profile on your ArubaOS 8.x system?  If that happens, the access points will "ping-pong" between systems in an upgrade/downgrade loop.