Network Management

 View Only
Back to discussions
Expand all | Collapse all

iMC alarm display/showing not existing interface number

This thread has been viewed 0 times

  • 1.  iMC alarm display/showing not existing interface number

    Posted Feb 07, 2019 04:13 AM

    Hi All,

     

    i'm a bit confiused i'm reciving alrams via email and for some reaseon the iMC is sending email about interface down but the interface number is not matching the any interface in the switch

    for example:

    here is the alarm with non exsiting interface

    [Critical]The interface 46 is DOWN

    the switch is 5940 runing Boot image: flash:/5940-cmw710-boot-r2510p01.bin

    and there isnt any 46 interface the right syntex is 1/x



  • 2.  RE: iMC alarm display/showing not existing interface number

    Posted Feb 07, 2019 09:14 AM

    Hello Dati_Zeru,

    What does it look like inside iMC? A interface down would be a trap. So you should be able to trace it from the trap to the alarm &  see what the trap actually claims the port number is. 

    See in iMC Alarm -> Alarm Browse and Alarm -> Trap Management in the Gui



Related Content