My company bought a new Aruba 2920-48G switch which is intended for creating 3 new vlans. The plan is to use the switch to route the traffic of the new VLANs. As a test, I created two VLANs and tried to communicate them using "ip routing" command, but I failed.
This is my switch configuration:
Running configuration:
; J9729A Configuration Editor; Created on release #WB.16.02.0012
; Ver #0e:01.b0.ee.34.5f.3c.29.eb.9f.fc.f3.ff.37.ef:73
hostname "HP-2920-48G-POEP"
module 1 type j9729a
ip routing
snmp-server community "public" unrestricted
oobm
ip address dhcp-bootp
exit
vlan 1
name "DEFAULT_VLAN"
no untagged 1-8,13-20
untagged 9-12,21-48
no ip address
exit
vlan 10
name "VLAN10"
untagged 1-8
tagged 9-12,21
ip address 192.168.1.1 255.255.255.0
exit
vlan 20
name "VLAN20"
untagged 13-20
tagged 21-24
ip address 192.168.2.1 255.255.255.0
exit
And these are my test hosts' configuration:
Hosts Info:
First Host. Plugged in a VLAN 10 port
IPV4 Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Second Host. Plugged in a VLAN 20 port
IPV4 Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Pinging any host would result on either a timeout for an untagged port or a destination host unreachable for a tagged port. However, a "show arp" command on the switch shows both hosts, so I thinkthe problem is that I am missing something in the switch configuration.
Please keep in mind that I am completely new to Aruba switches, so any help would be appreciated.