Wired Intelligent Edge

I am having issues with a switch that won't accept any commands in global config mode. I also tried to upgrade the switch in privilege exec mode and it's saying invalid input. I tried to reboot the switch via the web and it just spins and then times out. I tried to upgrade the firmware via the web gui and the upload button is greyed out. Any suggestions or do I need to open a case with TAC. Below is a screenshot of what happens when I enter commands. The switch has a basic config. I've been working with HP for years and am very familiar with 2530s. The commands work fine on another 2530.

Could it be that this switch is managed in Central/Airwave/IMC/other? That could be a reason that local configuration is blocked.

------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.

In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------