Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

License expire log at the centralized licenses setting

This thread has been viewed 3 times

  • 1.  License expire log at the centralized licenses setting

    Posted Dec 09, 2015 02:33 AM

    Hi Aruba support team

     
    I question about Two Issue to you.
     
    first issue is log display to License will expire message. 
     
    currently,  Aruba 3600 configuration is Master and Local.
     
    Aruba 3600 Master has to license but Aruba 3600 Local has not to license.
     
    But, Aruba 3600 was setting centralized licenses. so, Aruba 3600 master & Local is share to license. 
     
    Message is as below :
     
    Sep 29 00:00:18 <licensemgr 300108>  <CRIT> |licensemgr|  Licenses will expire in 4 days
    Sep 30 00:00:18 <licensemgr 300108>  <CRIT> |licensemgr|  Licenses will expire in 3 days
    Oct 1 00:00:27 <licensemgr 300108>  <CRIT> |licensemgr|  Licenses will expire in 2 days
    Oct 2 00:00:19 <licensemgr 300109>  <ALRT> |licensemgr|  Licenses will expire in 1 days
     
    I would like know to problem about Issue.
     
    second issue is display log to different time with controller set time.
     
    Message is as below :
     

    Oct 1 00:00:27 <licensemgr 300108>  <CRIT> |licensemgr|  Licenses will expire in 2 days
    Oct 2 00:00:19 <licensemgr 300109>  <ALRT> |licensemgr|  Licenses will expire in 1 days
    Mar 20 08:24:35 <wms 126002>  <ERRS> |wms| |ids| Rogue AP: The system classified an access point(BSSID 4c:e6:76:db:cb:f8 and SSID 4CE676DBCBF8-1 on CHANNEL 9) as rogue. Additional Info: Detector-AP-Name:6.1.2; Detector-AP-MAC:18:64:72:d5:50:a0; Detector-AP-Radio:2.

    (PC#1) # 
    (PC#1) #
    (PC#1) #show clock

    Thu Oct 22 08:13:09 KST 2015 

    I would like know to problem about Issue.
     
    License has only AP license.
     
    Regards
     
    IJ


  • 2.  RE: License expire log at the centralized licenses setting

    Posted Dec 09, 2015 02:47 AM

    In terms of the first question, the log message suggests you have en evaluation license on the local.

    If you do a "show license" on both controllers, do you see anything there?

    Does a "show switches" look correct on the master, in terms of the local being connected?

    Have you rebooted both controllers since enabling centralised licensing? I've found that to be necessary in the past a couple of times.

    In terms of the second question, have you rebooted the local since setting the clock? I'd try that first, then do a "show log all". The most recent messages should have the right time stamps.

     



Related Content