Network Management

i need to search for some "lost" wired access points.  I need to find out if they are currently associated to the controller using the CLI. i do not have access to the controller GUI when working remote.  

i see that i can find the serial number using the "show ap active type access-point" and other show commands but none will give me the SN of the access point unless i have the IP, MAC, name......etc.     ALL i have is a SN and i need to see if that SN is associated....OR, list all of the AP's detailed info that includes the SN using the CLI.


Any assistance would be appreciated

Try "show ap database long" on the Mobility Conductor.

------------------------------
Marcel Koedijk | MVP Expert 2022 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
------------------------------

Original Message:
Sent: Jan 09, 2023 09:58 AM
From: Anthony Shutters
Subject: List serial numbers via CLI

i need to search for some "lost" wired access points.  I need to find out if they are currently associated to the controller using the CLI. i do not have access to the controller GUI when working remote.

i see that i can find the serial number using the "show ap active type access-point" and other show commands but none will give me the SN of the access point unless i have the IP, MAC, name......etc.     ALL i have is a SN and i need to see if that SN is associated....OR, list all of the AP's detailed info that includes the SN using the CLI.


Any assistance would be appreciated

Yep, that did it............

Beautiful.  I wish i could export it in a columnized format but i'll  take it.


thank you
Original Message:
Sent: Jan 09, 2023 03:00 PM
From: marcel koedijk
Subject: List serial numbers via CLI

Try "show ap database long" on the Mobility Conductor.

------------------------------
Marcel Koedijk | MVP Expert 2022 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own

Original Message:
Sent: Jan 09, 2023 09:58 AM
From: Anthony Shutters
Subject: List serial numbers via CLI

i need to search for some "lost" wired access points.  I need to find out if they are currently associated to the controller using the CLI. i do not have access to the controller GUI when working remote.

i see that i can find the serial number using the "show ap active type access-point" and other show commands but none will give me the SN of the access point unless i have the IP, MAC, name......etc.     ALL i have is a SN and i need to see if that SN is associated....OR, list all of the AP's detailed info that includes the SN using the CLI.


Any assistance would be appreciated