Cloud Managed Networks

 View Only

  • 1.  Manual cluster for CoA onguard

    Posted Aug 09, 2024 11:35 AM

    Hello i was wondering if you really need to configure the manual cluster for the coa to work ? you know to terminate the session and what do you need for onguard to work

    If the answer is yes do i just configure the virtual IPs, the vlan vrrp and the vrrp id and the passphrase and that's it? 

    What about the virtual ips which is different in each controller what fw permissions they need? it just that i don't understand how it works

    If anyone can tell me please

    Thanks

    Carlos



  • 2.  RE: Manual cluster for CoA onguard

    Posted Aug 13, 2024 11:55 AM

    Carlos, did you see this page already on how CoA in clusters works? I personally have not yet configured CoA with manual clusters, so not sure if you get all the information from there..



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 3.  RE: Manual cluster for CoA onguard

    Posted Aug 13, 2024 12:10 PM

    thanks for answering me!

    as far i understand in the automatic cluster there is no coa for the onguard

    that i need the manual cluster

    if this true or false?


    Original Message


  • 4.  RE: Manual cluster for CoA onguard

    Posted Aug 13, 2024 04:27 PM

    i mean im just thinking on configuring the manual cluster just because of the CoA.  If CoA works with automatic cluster will just go with automatic cluster

    let me know 


    Original Message


  • 5.  RE: Manual cluster for CoA onguard

    Posted Aug 14, 2024 04:27 AM

    Hi.

    First leave cluster on Auto and create the cluster. Then when cluster is formed, change it to manual and enable CoA. This is one way of doing it as it was used in Aruba AOS10 workshops.

    Best, Gorazd



    ------------------------------
    Gorazd Kikelj
    MVP Guru 2024
    ------------------------------

    Original Message


Related Content