Comware

 View Only

  • 1.  MIB for 1820 Series

    Posted Apr 02, 2020 12:28 PM

    We have a lot of  HPE1820 starting from 8 port to 24 both nonPoE and PoE variants across the network and are trying to set up monitoring of them all using SNMP but I cannot find where to download MIB files on the site. 1800 are added alongside their firmware but not for these. Any ideas?



  • 2.  RE: MIB for 1820 Series

    Posted Apr 03, 2020 02:34 AM
    The switch supports read-only access to a limited set of MIBs.  The supported MIBs are as follows.
     
    :• BRIDGE-MIB (IEEE 802.1Q)
    • LLDP-MIB (IEEE 802.3AB)
    • EtherLike-MIB
    •IF-MIB
    • RFC1213-MIB
    • RMON-MIB (RMON History as in v1)
    • Power Ethernet MIB (RFC3621), only on switches that support PoE+. (No SNMP information is available on configured PoE schedules.)
     
    This product documentation does not have any link to download these MIBs and I guess since these are the standard MIBs, these should be already preloaded to the MIB Compiler/NMS already which you are using and there is no need to add them to the NMS.
     
     


Related Content