Network Management

 View Only
Back to discussions
Expand all | Collapse all

mirroring session on 2 ports?

This thread has been viewed 4 times

  • 1.  mirroring session on 2 ports?

    Posted Jul 31, 2024 01:37 PM

    hi, i have a switch HP 2530-24G-PoEP Switch (J9773A),  working for the ISP failover process

    --> In the interface 1 i have the ISP1

    --> In the interface 10 we have the ISP2

    i want to enable mirroring, the packet capture interface will be the Interface 24.

    i will put a packet analyzer on this the port 24...

    can i enable the monitoring for both interfaces at the same time? if so, what is the right syntaxis?

    thanks!



    ------------------------------
    Luis Guajardo
    ------------------------------


  • 2.  RE: mirroring session on 2 ports?

    Posted Aug 01, 2024 08:29 AM

    Have not tested with a 2530, not sure if it supports multiple mirror destinations, but on a 2930F the following seems to work:

    mirror 1 port 24
interface 1 monitor all both mirror 1
interface 10 monitor all both mirror 1

    Please check if it works, it may be as well that a 2530 only has 1 mirror destination and commands are simplified/different for that reason.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



Related Content