Wireless Access

Hello at all,

we have a mobility master environment with several mobility devices.
If i do "show user" on /mm level there is ​following output:

(mm01) [mynode] #show user 
This operation can take a while depending on number of users. Please be patient ....
(mm01) [mynode] #

No matter if i filter for a specific mac or user role.

Regarding to documentation it should work, or am i wrong?

This command works only on MD intself, but that makes no sense at all if I do not know where user is connected.
In GUI I see all Users on mm level.

We are using 8.6.0.8





------------------------------
Florian Kueck
------------------------------

"show user" only shows users that actually terminate on the MD.  On the MM there are no users.  On the MM you need to "show global-user-table list"

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: Apr 01, 2021 01:37 AM
From: Florian Kueck
Subject: Mobility Master show user fails

Hello at all,

we have a mobility master environment with several mobility devices.
If i do "show user" on /mm level there is ​following output:

(mm01) [mynode] #show user 
This operation can take a while depending on number of users. Please be patient ....
(mm01) [mynode] #

No matter if i filter for a specific mac or user role.

Regarding to documentation it should work, or am i wrong?

This command works only on MD intself, but that makes no sense at all if I do not know where user is connected.
In GUI I see all Users on mm level.

We are using 8.6.0.8





------------------------------
Florian Kueck
------------------------------

Thanks a lot!

------------------------------
Florian Kueck
------------------------------

Original Message:
Sent: Apr 01, 2021 02:03 AM
From: Colin Joseph
Subject: Mobility Master show user fails

"show user" only shows users that actually terminate on the MD.  On the MM there are no users.  On the MM you need to "show global-user-table list"

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Apr 01, 2021 01:37 AM
From: Florian Kueck
Subject: Mobility Master show user fails

Hello at all,

we have a mobility master environment with several mobility devices.
If i do "show user" on /mm level there is ​following output:

(mm01) [mynode] #show user 
This operation can take a while depending on number of users. Please be patient ....
(mm01) [mynode] #

No matter if i filter for a specific mac or user role.

Regarding to documentation it should work, or am i wrong?

This command works only on MD intself, but that makes no sense at all if I do not know where user is connected.
In GUI I see all Users on mm level.

We are using 8.6.0.8





------------------------------
Florian Kueck
------------------------------