Wired Intelligent Edge

Dear sir

How to give an IP to the management module for the MM module in 5406Rcore switch?

attached the image for your reference

Regards

Biju

What's about having a look at something called HPE ArubaOS Switch Basic Operation Guide?

By default the Switch should be configured to acquire an IP Address configuration from a properly configured DHCP server or Bootp server (if any).

If DHCP server or Bootp server isn't available (or isn't configured to provide an IP Address to the Switch) then you should connect via Out-of-Band (so via Console) and manually assign an appropriate IP Address/Subnet Mask and Default Gateway to the Switch through console.

Another interesting and always useful document is the HPE ArubaOS Switch Management and Configuration Guide (for K/KA/KB.16.01, but you can find it also for K/KA/KB.15.18).

dear Sir

Thanks for the response

I ll be conencteing to a console and manually configuring IP. But will be the port number for assinging the ip

I ll create a management VLAn and need to assign IP to the managment port in MMI module

Regards

Biju