You cannot have multiple Instant clusters in the same (L2) VLAN/Network.
If both clusters are in a different VLAN, it may work. But make sure that the AP-315s don't see the IAP-200s on its Ethernet interfaces.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Oct 24, 2023 08:46 AM
From: pupdlapt
Subject: New AP IAP-315-RW
I have a problem with AP 315-rw. I have a network without DHCP. I have configured the virtual controller and 1 AP as Preferred Conductor - the wi-fi network works. I change the address of the next AP to static and after restarting it is not seen by the working virtual controller. Neither auto join or manual addition helped. The AP is not detected even though its IP is visible on the network. I will add that I already have an old version of the virtual controller with 5 AP IAP-200 in the same network, but I have disabled auto join there. What could be wrong.