Network Management

 View Only

  • 1.  new switch device in new building setting

    Posted Jan 27, 2025 07:46 AM
    Hi, 
    There are included different area, such 172.17.211.X, 172.17.212.X, 192.6.1.X, and and it's need to added another area for the new switch, is there main setting which I need to add to the new switch? Thanks.



  • 2.  RE: new switch device in new building setting

    Posted Jan 27, 2025 06:56 PM

    Hello,

    Could you please specify a bit more what configuration you want to have or the topology you are going to use so we can help you a bit more.

    Thanks



    ------------------------------
    Daniel Ruiz
    -----------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support.
    Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC.
    ------------------------------



  • 3.  RE: new switch device in new building setting

    Posted Feb 03, 2025 08:27 AM
    Thanks, 
    My default setting is below, I am not sure which setting is needed for the new switch?
    hostname "A1"
    fault-finder broadcast-storm sensitivity high
    fault-finder bad-driver sensitivity high
    fault-finder bad-transceiver sensitivity high
    fault-finder bad-cable sensitivity high
    fault-finder over-bandwidth sensitivity high
    fault-finder loss-of-link sensitivity high
    fault-finder duplex-mismatch-hdx sensitivity high
    fault-finder duplex-mismatch-fdx sensitivity high
    logging 192.168.1.15
    logging severity info
    timesync sntp
    sntp unicast
    sntp server priority 1 192.168.12.1
    no telnet-server
    time timezone 480
    ip default-gateway 192.168.1.254
    vlan 1 
    name 'DEFAULT_VLAN"
    untagged 1-52
    ip address 192.168.1.212 255.255.255.0

     




    Original Message


Related Content