Cloud Managed Networks

I have a customer who has an OS10 wireless deployment using APs and gateways. I need to create a test SSID that will only broadcast on the IT AP so we can test a new service. 

In the past, I would put the SSID in a zone and then put the AP in the same zone. But zones seem to have disappeared from Central. I know I can individually set each AP to broadcast whichever SSID I want but this customer has over 100 APs so this would take forever. Is there a more efficient method? Have zones been replaced with something else?

Thanks

with AOS10, you can do configuration per AP as well. So basically choose the device level configuration and add your SSID.

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Original Message:
Sent: Apr 25, 2024 05:54 AM
From: dave_m
Subject: No Zones in OSv10. How to do an AP Specific SSID

I have a customer who has an OS10 wireless deployment using APs and gateways. I need to create a test SSID that will only broadcast on the IT AP so we can test a new service. 

In the past, I would put the SSID in a zone and then put the AP in the same zone. But zones seem to have disappeared from Central. I know I can individually set each AP to broadcast whichever SSID I want but this customer has over 100 APs so this would take forever. Is there a more efficient method? Have zones been replaced with something else?

Thanks