Hi,
Is it possible to show OSPF LSA much more in detail?
Specifically, I would like to see a link in a router LSA advertised by the switch CX 8360 running AOS 10.15.1040, but I could see only summarized information as attached.
In order to make sure the validity of LSA before replacing the old switch with the CX8360, it would be very applicated if you could kindly let me know how to do it.
```
# show ip ospf lsdb vrf xxx router adv-router self
OSPF Router with ID (x.x.x.x) (Process ID 1 VRF xxx)
=================================================================
Router Link State Advertisements (Area x.x.0.0)
---------------------------------------------------
LSID ADV Router Age Seq# Checksum Link Count
-------------------------------------------------------------------------------
10.x.x.x 10.x.x.x 1009 0x80000002 0x000074d8 2
```
-------------------------------------------