Comware

 View Only

  • 1.  PRoblem with 5500G-EI 24SFP with 10GB xenpak

    Posted Nov 27, 2012 11:50 AM

    Hi all,

     

    i have a problem with 5500G-EI (24 SFP) with module 3C17261 with xenpak 3CXENPAK94 connect to 4800G with 10GB module XFP.

     

    My problem is when i try to passtrought in this link plus VLAN then the VLAN 1.

     

    Seems to be that in this link pass only one VLAN.

     

    I try to configure the link in a port link-type hybrid and also port link-type trunk but only VLAN 1 passtrought into a link.

     

    In a 5500 the version is 3.03.02S168P19 and in a 4800 5.20 release 2202P15.

     

    Help Me.

     

    Thansk for all

     

    P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. -HP Forum Moderator



  • 2.  RE: PRoblem with 5500G-EI 24SFP with 10GB xenpak

    Posted Nov 27, 2012 12:53 PM

    Paste some relevant config? dis cur int, dis vlan etc.



  • 3.  RE: PRoblem with 5500G-EI 24SFP with 10GB xenpak

    Posted Nov 28, 2012 03:30 AM

    Hi, thanks for respons.

     

    Also say you that the two configuration is sample like a problem, is it possibile to passtrought hte 10gb link plus vlan then the 1 management?

     

    THANKS

     

    Follow two configuration :

     

    <4800G>display current-configuration
    #
     version 5.20 Release 2202P15, Release 2202P15
    #
     sysname 4800G
    #
     irf mac-address persistent timer
     irf auto-update enable
     undo irf link-delay
    #
     domain default enable system
    #
     telnet server enable
    #
     undo ip ttl-expires
    #
     undo cluster enable
    #
    igmp-snooping
    #
    vlan 1
     igmp-snooping enable
    #
    vlan 100
    #               
    vlan 208
     description NBX
     igmp-snooping enable
    #
    radius scheme system
     server-type extended
     primary authentication 127.0.0.1 1645
     primary accounting 127.0.0.1 1646
     user-name-format without-domain
    #
    domain system
     access-limit disable
     state active
     idle-cut disable
     self-service-url disable
    #
    user-group system
    #
    local-user admin
     authorization-attribute level 3
     service-type telnet terminal
    local-user manager
     password simple manager
     authorization-attribute level 2
     service-type telnet terminal
    local-user monitor
     password simple monitor
     authorization-attribute level 1
     service-type telnet terminal
    #
    interface NULL0
    #
    interface Vlan-interface1
     ip address 10.10.0.23 255.255.240.0
    #
    interface GigabitEthernet1/0/1
     port access vlan 208
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/2
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable     
     stp edged-port enable
    #
    interface GigabitEthernet1/0/3
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/4
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/5
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/6
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/7
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/8
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/9
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/10
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/11
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/12
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/13
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/14
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/15
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/16
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/17
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #               
    interface GigabitEthernet1/0/18
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/19
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/20
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/21
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/22
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/23
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/24
     broadcast-suppression pps 3000
     undo jumboframe enable
     poe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/25
     shutdown
     broadcast-suppression pps 3000
     undo jumboframe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/26
     shutdown
     broadcast-suppression pps 3000
     undo jumboframe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/27
     shutdown
     broadcast-suppression pps 3000
     undo jumboframe enable
     stp edged-port enable
    #
    interface GigabitEthernet1/0/28
     shutdown
     broadcast-suppression pps 3000
     undo jumboframe enable
     stp edged-port enable
    #
    interface Ten-GigabitEthernet1/2/1
     port link-type hybrid
     port hybrid vlan 100 208 tagged
     port hybrid vlan 1 untagged
    #
     ip route-static 0.0.0.0 0.0.0.0 10.10.0.2
    #
     snmp-agent
     snmp-agent local-engineid 8000002B0320FDF1849A41
     snmp-agent community read public
     snmp-agent community write private
     snmp-agent sys-info version all
    #
    user-interface aux 0
     authentication-mode scheme
    user-interface aux 1 8
    user-interface vty 0 4
     authentication-mode scheme
    #
    return




    ****************************************************

    <4800G>display version
    3Com Corporation
    Switch 4800G PWR 24-Port Software Version 5.20 Release 2202P15
    Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved.
    Switch 4800G PWR 24-Port uptime is 0 week, 0 day, 0 hour, 44 minutes

    Switch 4800G PWR 24-Port with 1 Processor
    256M    bytes SDRAM
    32768K  bytes Flash Memory

    Hardware Version is REV.C
    CPLD Version is 002
    Bootrom Version is 604
    [SubSlot 0] 24GE+4SFP+POE Hardware Version is REV.C
    [SubSlot 2] 1 XFP Hardware Version is REV.B

     

    _ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  __ _ _ _ _ _ _  _

     

    <5500G-EI>display current-configuration
    #
     sysname 5500G-EI
    #
     undo password-control aging enable
     undo password-control length enable
     undo password-control history enable
     password-control login-attempt 3 exceed lock-time 120
    #
     local-server nas-ip 127.0.0.1 key 3com
    #
     igmp-snooping enable
    #
    radius scheme system
    #
    domain system
    #
    local-user admin
     service-type telnet terminal
     level 3
    local-user manager
     password simple manager
     service-type telnet terminal
     level 2
    local-user monitor
     password simple monitor                  
     service-type telnet terminal
     level 1
    #
     stp disable
    #
    acl number 3997
     rule 0 permit ip dscp ef
     rule 1 permit tcp destination-port eq www
     rule 2 permit udp destination-port eq snmp
     rule 3 permit udp destination-port eq snmptrap
     rule 4 permit ip dscp cs6
     rule 5 permit ip dscp cs7
    #
    acl number 4999
     rule 0 permit type 8868 ffff
     rule 1 permit source 00e0-bb00-0000 ffff-ff00-0000
     rule 2 permit source 0003-6b00-0000 ffff-ff00-0000
     rule 3 permit source 00e0-7500-0000 ffff-ff00-0000
     rule 4 permit source 00d0-1e00-0000 ffff-ff00-0000
     rule 5 permit source 0001-e300-0000 ffff-ff00-0000
     rule 6 permit source 000f-e200-0000 ffff-ff00-0000
     rule 7 permit source 0060-b900-0000 ffff-ff00-0000
     rule 8 deny dest 0000-0000-0000 ffff-ffff-ffff
    #                                         
    qos-profile default
     packet-filter inbound link-group 4999 rule 8
     traffic-priority inbound ip-group 3997 rule 0 cos voice
     traffic-priority inbound ip-group 3997 rule 4 cos network-management
     traffic-priority inbound ip-group 3997 rule 5 cos network-management
     traffic-priority inbound link-group 4999 rule 0 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 1 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 2 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 3 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 4 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 5 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 6 dscp ef cos voice
     traffic-priority inbound link-group 4999 rule 7 dscp ef cos voice
    #
    vlan 1
     igmp-snooping enable
    #
    vlan 100
    #
    vlan 208
     igmp-snooping enable
    #
    interface Vlan-interface1
     ip address 10.10.0.22 255.255.240.0      
    #
    interface Aux1/0/0
    #
    interface GigabitEthernet1/0/1
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/2
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/3
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/4
     stp edged-port enable
     broadcast-suppression pps 3000           
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/5
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/6
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/7
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/8
     stp edged-port enable
     broadcast-suppression pps 3000           
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/9
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/10
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/11
     stp edged-port enable
     port link-type hybrid
     port hybrid vlan 100 208 tagged
     port hybrid vlan 1 untagged
     broadcast-suppression pps 3000
     shutdown
     undo jumboframe enable
     apply qos-profile default                
    #
    interface GigabitEthernet1/0/12
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/13
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/14
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/15
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default                
    #
    interface GigabitEthernet1/0/16
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/17
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/18
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/19
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default                
    #
    interface GigabitEthernet1/0/20
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/21
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/22
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/23
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default                
    #
    interface GigabitEthernet1/0/24
     stp edged-port enable
     broadcast-suppression pps 3000
     shutdown
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/25
     stp edged-port enable
     port link-type hybrid
     port hybrid vlan 100 208 tagged
     port hybrid vlan 1 untagged
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/26
     stp edged-port enable
     broadcast-suppression pps 3000
     shutdown
     undo jumboframe enable
     apply qos-profile default
    #                                         
    interface GigabitEthernet1/0/27
     stp edged-port enable
     broadcast-suppression pps 3000
     shutdown
     undo jumboframe enable
     apply qos-profile default
    #
    interface GigabitEthernet1/0/28
     stp edged-port enable
     broadcast-suppression pps 3000
     undo jumboframe enable
     apply qos-profile default
    #
    interface TenGigabitEthernet1/1/1
     port link-type hybrid
     port hybrid vlan 100 208 tagged
     port hybrid vlan 1 untagged
    #
    interface Cascade1/2/1
    #
    interface Cascade1/2/2
    #
    interface NULL0
    #                                         
     voice vlan mac-address 0001-e300-0000 mask ffff-ff00-0000 description Siemens AG phone
     voice vlan mac-address 0060-b900-0000 mask ffff-ff00-0000 description Philips and NEC AG phone
    #
     ip route-static 0.0.0.0 0.0.0.0 10.10.0.2 preference 60
    #
     snmp-agent
     snmp-agent local-engineid 8000002B4001C68F69806877
     snmp-agent community read public
     snmp-agent community write private
     snmp-agent sys-info version all
    #
    user-interface aux 0 7
     authentication-mode scheme
    user-interface vty 0 4
     authentication-mode scheme
    #
    return





    ***************************************************************

    <5500G-EI>display version
    3Com Corporation
    Switch 5500G-EI Software Version 3Com OS V3.03.02s168p19
    Copyright (c) 2004-2012 3Com Corporation and its licensors, All rights reserved.
    Switch 5500G-EI uptime is 0 week, 0 day, 0 hour, 43 minutes

    Switch 5500G-EI SFP 24-Port with 1 Processor
    128M    bytes SDRAM
    16384K  bytes Flash Memory
    Config Register points to FLASH

    Hardware Version is REV.B
    CPLD Version is 004
    Bootrom Version is 5.05
    [Subslot 0] 24SFP+4GE  Hardware Version is 00.00.00
    [Subslot 1] 1 Xenpak Hardware Version is REV.D
                CPLD Version is 002
                Bootrom Version is 220
    [Subslot 2] 2 STACK Hardware Version is REV.B



  • 4.  RE: PRoblem with 5500G-EI 24SFP with 10GB xenpak

    Posted Dec 06, 2012 01:55 PM

    Hi all,

     

    any users have some ideas for qhy is not function.

     

    It's a simple configuration and a sample configuration to have a multiple VLAN pass trought the 10GB link.

     

    I have no idea for qhy the VLAN different as a VLAN ID 1 not possible to pass the link like another link i try like a 1GB with transciever plus also LACP portocol.

     

    I hope to try the risolution......and help me

     

    Thanks for all



Related Content