Comware

Hi,
I am trying to setup a network using 802.1x authentication where ports are assigned a vlan id via radius.

I have seen the various foundry documents and have got this working. When IAS sends the vlan to the switch, the switch places the port in a web vlan mode as opposed to tagged or untagged.

I am wondering is it possible for IAS to send a string to the hp 2650 which will allow it to place a port in vlan 2 as tagged and vlan 3 as untagged.

the foundry network documents indicate this is possible on their switches, does HP have a similar command or attribute I can use to acheive the same thing?

Which Foundry document are you referring to?

The only way I believe you can do this on a ProCurve switch is to statically set the port for the tagged VLANs that it may require, and let RADIUS assign the untagged VLAN.

Hi Matt,

thanks for the reply
i'm referring to this document
http://www.foundrynet.com/pdf/wp-deploying-mac-with-ias.pdf

oh page 46 it mentions sending untagged and tagged vlan information to the switch, I was hoping HP switches have similar attributes that we could use.

Thanks.