Wired Intelligent Edge

 View Only

  • 1.  ProCurve 2810 Erased

    Posted Oct 17, 2011 12:39 PM

    Hello at All.

     

    I've erased primary and secondary flash memories. See below:

     

    Torre Radar# erase flash  primary

    The Primary OS Image will be deleted, continue [y/n]?  y

    Torre Radar# erase flash  secondary

    The Secondary OS Image will be deleted, continue [y/n]?  y

    Torre Radar#

    Torre Radar# erase startup-config

     <cr>

    Torre Radar# erase startup-config

    Configuration will be deleted and device rebooted, continue [y/n]?  y

     

     

    After this, I'm not able to connect to the switch (hyperterminal via V.24 or other) .....

     

    so what can I do? I want to recovery that switch: is it possible?

     

    Many thanks

     

     

     

     



  • 2.  RE: ProCurve 2810 Erased

    Posted Oct 17, 2011 05:03 PM

    You can recover your device over serial port. As attachment please find a recovery procedure.



  • 3.  RE: ProCurve 2810 Erased

    Posted Oct 18, 2011 06:24 AM

     

    Hi Alex_Ke,

     

    thank you, I'll give you a feedback asap.

     

    Bye



Related Content