Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

Quick Reference for AP PoE Requirements

This thread has been viewed 62 times

  • 1.  Quick Reference for AP PoE Requirements

    Posted Jul 02, 2024 07:16 PM
    Edited by jpb Aug 01, 2024 11:43 AM
      |   view attached
      730 650 630 615 555 535 515 505
    Eth interfaces 2x5G 2x5G 2x2.5G 1x2.5G 2x5G 2x5G 1x2.5G, 1x1G 1x1G
    802.3af support  

    2 Ports & IPM enabled*

    		   IPM       IPM
    802.3at Class 4 (30W) support IPM IPM IPM X IPM IPM X X
    802.3bt Class 6 (60W) or higher preferred (no IPM, no restrictions) X X X   X X  
    When PoE power is supplied to both Ethernet ports, power from both interfaces is combined    X     X X    
    When PoE power is supplied to both Ethernet ports, either port can be configured as the active power source Active/Standby X   X          
    Only Eth0 supports POE       X     X X
    When powered by 802.3at (class 4) PoE with the IPM feature disabled, the AP will disable:
    USB ports
    2nd Ethernet
    2x2 all radios
    4x4 only 5G radio
    Disable tri-radio    		 USB 
    • USB*
    • 2nd Eth
    • 2x2 All Radios*
    		 USB USB
    • USB
    • 2nd Eth
    • 4x4 (5G)
    • Disable tri-radio
    • USB
    • 2nd Eth
    		   USB

    Attachment(s)

    xlsx
    AP Power Requirements.xlsx   10 KB 1 version


  • 2.  RE: Quick Reference for AP PoE Requirements

    Posted 28 days ago
    Edited by jpb 28 days ago
    image

    Updated Table with 725 and 745

      750 740 730 720 650 630 615 555 535 515 505
    Eth interfaces 2x10G 1x5G 2x5G 1x2.5G 2x5G 2x2.5G 1x2.5G 2x5G 2x5G 1x2.5G, 1x1G 1x1G
    802.3af support 2 Ports & IPM*  No No  IPM 2 Ports & IPM* No  IPM No  No  IPM IPM
    802.3at Class 4 (30W) support  1x Eth & IPM^
    2x Eth IPM not required    		 IPM IPM True IPM IPM True IPM IPM True True
    802.3bt Class 6 (60W) or higher preferred (no IPM, no restrictions) TRUE TRUE TRUE N/A  TRUE TRUE  N/A TRUE TRUE

     N/A

    		  N/A
    When PoE power is supplied to both Ethernet ports, power from both interfaces is combined  TRUE N/A No  N/A TRUE  No  N/A TRUE TRUE  No  N/A
    When PoE power is supplied to both Ethernet ports, either port can be configured as the active power source Active/Standby  No N/A  TRUE True   No TRUE  N/A

    No

    		 No  N/A  N/A
    Only Eth0 supports POE  No TRUE    True  No  No TRUE  No  No TRUE TRUE
    When powered by 802.3at (class 4) PoE with the IPM feature disabled, the AP will disable: • USB*^
    • 2nd Eth^
    • 2x2 All Radios*^    		 • USB  • USB  •USB
    •Max TX power -3dB on all radios    		 • USB*
    • 2nd Eth
    • 2x2 All Radios*    		 • USB • USB • USB
    • 2nd Eth
    • 4x4 (5G)
    • Disable tri-radio    		 • USB
    • 2nd Eth    		   • USB



Related Content