Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

Re: AX wireless with 10g SFP

This thread has been viewed 1 times

  • 1.  Re: AX wireless with 10g SFP
    Best Answer

    Posted Oct 20, 2020 03:47 AM

    From the specifications of the 2930F (link

     

    40G 8 HPE Smart Rate PoE+ 1-slot Switch (JL323A):

    • 36 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T PoE+)
    • 8 802.3bz 1/2.5/5 and 10GBASE-T copper PoE+ ports
    • 4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports

     

    The built-in SFP ports are normal SFP, so up to 1000 Mbps only. For 10G you need SFP+, which is not available in the 2930M in the chassis.
    However, the modularity of the 2930M support an uplink module where you can fit in the JL083A 4SFP+ MACsec Module, that adds 4 SFP+ slots to the switch, or the JL078A (1QSFP+ 40 GbE), or a 4 port Smart Rate JL081A to run your uplinks over copper cable if lengths and existing (or new) cabling allow you to.

     

    Alternatively, you could have a look at the 6300M product line which has similar properties with ArubaOS-CX and built-in SFP56 (50Gbps) uplink modules.

     

    Your Aruba partner or local Aruba sales team can assist you to select the right fit switch.



  • 2.  RE: Re: AX wireless with 10g SFP

    Posted Oct 20, 2020 03:50 AM

    **EDIT - Ah, Herman is too quick!  

     

     If will support 4x 10G via SFP+ if you add the Aruba 3810M/2930M 4SFP+ MACsec Module (JL083A). A standard 2930M (JL323A) without the Module has the following (inc Smart Rate).

     

     

    40G 8 HPE Smart Rate PoE+ 1-slot Switch (JL323A):

36 Autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000Base-T PoE+)
8 802.3bz 1/2.5/5 and 10GBASE-T copper PoE+ ports
4 Combo 10/100/1000BASE-T or 100/1000 Mbps SFP Ports

     

     



Related Content