Comware

I am writing to you as an IT professional and enthusiast based in Serbia, currently expanding my home lab environment to further my skills in network administration.

During a recent maintenance and learning session involving my HPE OfficeConnect 1920-24G switch Product No: JG924A,  I unfortunately performed an accidental deletion of the system firmware (.bin file) from the flash memory. As a result, the device is currently in a non-functional state and requires a fresh firmware installation to be restored.

I am fully aware that this model may have reached its End of Life (EOL) status, but I would be extremely grateful if you could provide the original system image/firmware file or point me toward a legitimate source where I could obtain it to restore the switch.

Thank you very much for your time and for any assistance you can provide to help me get this device back into service for my studies.

Best regards,

Milos Pavlovic

What you're asking is legally/contractually questionable so don't expect too much from here.

From a couple minutes of sleuthing, it looks like OpenWRT has a custom firmware, so you might be able to load a complete non-HPE firmware. Just don't break the bootloader. :)

Plug "openwrt HPE JG924A" into your search engine.

From looking at the wiki history for the model, there's a particular user who contributed to that wiki a lot. You might reach out to them through the OpenWRT support channels for support on loading OpenWRT.....