Wired Intelligent Edge

 View Only

  • 1.  Set VRRP Owner E5400zl with K15.15 Software

    Posted Jan 03, 2016 07:51 AM

    Hi All,

    I am trying to set VRRP Owner and Backups on a pair of E5400zl switches with Software version K15.15

    When running the commands to create VRID on VLANs - when trying to specify OWNER or BACKUP I get a prompt to say the command has been depreciated. Owner/backup is determined based on virtual-IP address configuration.

    I have looked around for guides and configuration examples for the new software version but cant seem to find anything. Can anyone point me in the right direction?

    Thanks



  • 2.  RE: Set VRRP Owner E5400zl with K15.15 Software

    Posted Jan 04, 2016 03:05 AM

    In VLAN config mode, I'd try typing the command below to see what options are available nowadays for setting VRRP priority:

    vrrp ?

     



  • 3.  RE: Set VRRP Owner E5400zl with K15.15 Software

    Posted Jan 06, 2016 08:31 PM

    The "owner" is the VLAN interface where the virtual is set the same as the configured IP address.

    Any VLAN interface with a configured IP address different from the virtual means it is a "backup".

    If you have more than one "backup" then you should change the priorites on them so that only one is using the default priority of "100".



Related Content