Wired Intelligent Edge

 View Only
Back to discussions
Expand all | Collapse all

SFP (J4858B) not recognized by module (J8706A) on insert

This thread has been viewed 0 times

  • 1.  SFP (J4858B) not recognized by module (J8706A) on insert

    Posted Jul 15, 2014 04:33 AM

    Hi,

     

    I've got two 8212 switches (fw K.15.10.0013m), both with two 24-ports SFP module (J8706A)

    When I insert SFP (J4858B) in switch 1 in one of 24-ports modules, SPF is not recognized at all (type field is empty and not showing 1000SX as expected).

     

    When I put the same SPF in switch 2, in the same type of module, SFP is recognized as expected.

     

    What can cause issue and how do I solve this, without restarting module or switch?

     

    Kind regards,

    Michael



  • 2.  RE: SFP (J4858B) not recognized by module (J8706A) on insert

    Posted Jul 24, 2014 07:09 AM

    Hi Michael,

     

    Are both your SFP port modules v2? A (B) transceiver is quite an old revision now. See below Matrix table for compatibility...

     

    http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c02605446-10%257CdocLocale%253D&javax.portlet.endCacheTok=com.vignette.cachetoken

     

    I take it no matter which SFP port you plug the transceiver in to on Switch 1 it is not recognised?

     

    HTH

     



Related Content