Wired Intelligent Edge

Hi @ all,

I found these OID in MIB file for the FANs of an ARUBA Switch:
1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4

If I do a walk on this OID , I only get the FANs from the first VSF Member.
But i would like to monitor the FANs of the second Unit as well:

LABXRN04# walkMIB 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4
hpicfFanState.1 = 5
hpicfFanState.2 = 5
hpicfFanState.3 = 5
LABXRN04# show system fans
Fan Information
VSF-Member 1
Num | State | Failures | Location
-------+-------------+----------+----------
Sys-1 | Fan OK | 0 | Chassis
Sys-2 | Fan OK | 0 | Chassis
Sys-3 | Fan OK | 0 | Chassis
0 / 3 Fans in Failure State
0 / 3 Fans have been in Failure State
VSF-Member 2
Num | State | Failures | Location
-------+-------------+----------+----------
Sys-1 | Fan OK | 0 | Chassis
Sys-2 | Fan OK | 0 | Chassis
Sys-3 | Fan OK | 0 | Chassis
0 / 3 Fans in Failure State
0 / 3 Fans have been in Failure State

Someone an idea what is the OID is for the other VSF members?

Thanks and best regards,
Jonas

Hi,

if i do a Walk over the power supplies, i get both from unit 1 and unit 2 (and potential units 3-8).

Maybe a bug?

BR,

Jonas

LABXRN04(eth-1/1)# walkMIB 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1
hpicfPsState.1 = 3
hpicfPsState.2 = 3
hpicfPsState.3 = 1
hpicfPsState.4 = 1
hpicfPsState.5 = 1
hpicfPsState.6 = 1
hpicfPsState.7 = 1
hpicfPsState.8 = 1
hpicfPsFailures.1 = 0
hpicfPsFailures.2 = 0
hpicfPsFailures.3 = 0
hpicfPsFailures.4 = 0
hpicfPsFailures.5 = 0
hpicfPsFailures.6 = 0
hpicfPsFailures.7 = 0
hpicfPsFailures.8 = 0
hpicfPsTemp.1 = 0
hpicfPsTemp.2 = 0
hpicfPsTemp.3 = 0
hpicfPsTemp.4 = 0
hpicfPsTemp.5 = 0
hpicfPsTemp.6 = 0
hpicfPsTemp.7 = 0
hpicfPsTemp.8 = 0
hpicfPsVoltageInfo.1 = AC 120V/240V
hpicfPsVoltageInfo.2 = AC 120V/240V
hpicfPsVoltageInfo.3 = -- ---------
hpicfPsVoltageInfo.4 = -- ---------
hpicfPsVoltageInfo.5 = -- ---------
hpicfPsVoltageInfo.6 = -- ---------
hpicfPsVoltageInfo.7 = -- ---------
hpicfPsVoltageInfo.8 = -- ---------

May be... open a case on support for confirmation !

Hi community,

It's a firmware related bug. Solved with newest firmware.

LABXRN04# walkMIB 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4
hpicfFanState.1 = 5
hpicfFanState.2 = 5
hpicfFanState.3 = 5
hpicfFanState.111001 = 5
hpicfFanState.111002 = 5
hpicfFanState.111003 = 5
hpicfFanState.211001 = 5
hpicfFanState.211002 = 5
hpicfFanState.211003 = 5