Wired Intelligent Edge

 View Only
Back to discussions
Expand all | Collapse all

Some ports w/no lights on 2810-24g J9021a

This thread has been viewed 0 times

  • 1.  Some ports w/no lights on 2810-24g J9021a

    Posted May 06, 2019 12:56 PM

    Hello,

    We have an old 2810-24G J9021A ProCurve switch that is acting very odd. Even after I factory restored the switch,  some ports will work and others no lights at all. I recently updated the firmware, but it was working ok as far as I am aware. Any thoughts on that or has this old switch finally had it?

    Jon



  • 2.  RE: Some ports w/no lights on 2810-24g J9021a

    Posted May 12, 2019 09:41 AM

    Hi

    This looks like a hardware failure . 

     



  • 3.  RE: Some ports w/no lights on 2810-24g J9021a

    Posted Sep 04, 2019 04:25 PM

    Hi,

    Please check the MDI and MDIX are having correct settings on the ports which are not working. Also can you post the Logs if you have any? And from which version to What version you have done firmware Upgradation ? After upgradation are you seeing the Lights on previously effected ports ?



Related Content