Wired Intelligent Edge

 View Only

  • 1.  SPF and SPF+

    Posted Jun 09, 2011 12:04 PM

    Hi All,

    I am looking at a J9536A which is SPF+ but using J4858C which is SPF will they work fine...?

     



  • 2.  RE: SPF and SPF+

    Posted Jun 09, 2011 12:52 PM

    I would not count on that working without it beeing explicity said somewhere in the docs of the card, and I cant find it. I know that most of the A-series SFP+/10G slots are backwards compatible with SFP/1G, but then its specified in the specs.



  • 3.  RE: SPF and SPF+

    Posted Jun 16, 2011 05:53 AM

    Page 2 of the compatability matrix to be found on: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02605446/c02605446.pdf

    gives you the answer.

     

    Yes, the 20-Port Gig-T PoE+ / 2-Port SFP+ v2 zl Module (J9536A) does support the SPF mentioned in your question on the minimum SW K.15.02.0004 and later.



  • 4.  RE: SPF and SPF+

    Posted Jun 16, 2011 09:12 AM

    Just a side note. The matrix is definitive as there are some older types of SFP+ modules that do not accept 1GB SFP's.

    In this case Mik-HPN is spot on :)



Related Content