Comware

Hi there,

I am looking for some help regarding routing over point to point links (Bagg Groups)

I have 2 sites connected via layer 2. There are 2 interfaces either side both in there respective BAGG group. I am looking to configure up a /30 Layer 3 on these so that cross site link will act as a layer 3. also. I need to  make sure a server can be pinged either side over layer 3 on these links. If someone can help that would be great. If you have a sample config that would be great.

Kindest regards

Hi @prodigy811 

To achive your requirment you need to use Layer 3 link-aggregation , for layer L2 we call its as BAGG and for L3 say RAGG (Route Aggregation group) 

I request you to refer below links which explaing about layer 3 link-aggregation and example 

https://techhub.hpe.com/eginfolib/networking/docs/switches/5920-5900/5998-5306a_l2-lan_cg/content/414623071.htm

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03152925