Comware

 View Only
Back to discussions
Expand all | Collapse all

strange behaviour when applying ACL on 5500G LAG

This thread has been viewed 0 times

  • 1.  strange behaviour when applying ACL on 5500G LAG

    Posted Jul 09, 2009 11:22 AM
    This is what I have :



    acl number 3005

    description "ACL TO FILTER TRAFIC FROM CISCO 4400(G1/0/1 G2/0/1)"

    rule 0 permit IP

    rule 1 deny IP source 1.2.3.0 0.0.0.255

    rule 2 permit IP source 1.2.3.0 0.0.0.255 destination 2.3.4.0 0.0.1.255

    rule 3 permit IP source 1.2.3.0 0.0.0.255 destination 2.3.4.5 0

    rule 4 permit IP source 1.2.3.0 0.0.0.255 destination 2.3.4.6 0

    rule 5 permit TCP source 1.2.3.0 0.0.0.255 source-port eq 5900





    We activate the ACL on the port :



    packet-filter inbound ip-group 3005



    AFTER A FEW SECONDS WE LOOSE LINK TO CISCO 4400 WIRELESS CONTROLLER



    #Jul 9 14:39:03:848 2009 SWITCH LAGG/2/AggPortInactive:- 1 -Trap 1.3.6.1.4.1.43.45.1.5.25.25.2.2(hwAggPortInactiveNotification): TrapIndex 5 Aggregation Group 5: port member GigabitEthernet2/0/1 is INACTIVE!

    Romain BAFFERT

    Cabling Partners


Related Content