Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

Suspicious state and wrong IP for APs

This thread has been viewed 0 times

  • 1.  Suspicious state and wrong IP for APs

    Posted Jul 29, 2013 12:44 AM

    Hi, all.

     

    We have a MSM760 controller with a mixture of 422 and 460 APs for a total of 37. Lately I have noticed that various of our access points are becoming suspicious. I have looked at the diag info displayed on the controller and that hasn't helped. The only change we have recently made was adding a new SSID to the network and added about 6 new APs (none of which have gone into the suspicious state). I have also noticed (but I think it has been doing it since day 1) that the APs themselves get a management IP from any VLAN that is tagged or untagged at the AP interface on the switch. There are a total of 3 SSIDs on out network all with different VLANS and a management VLAN for the AP that is untagged for the AP. We are running firmware version 5.7.2.0-12736.

     

    Does anyone have any suggestions to either of the problems? I don't necessarily think they are both related.

     

    Daniel

     



  • 2.  RE: Suspicious state and wrong IP for APs

    Posted Jul 31, 2013 12:24 AM
    u can set the AP to use static IP.. its easy to maintain..
    but u need to make sure the correct untagged port configured at switch


Related Content