I don't downgrade switches that much, so not fully sure if it is supported, so also not sure if a too new ROM may be an issue. Normally it's not as newer ROM/boot images fix issues from earlier versions, but it may be the case.
You may try to check with Aruba support if they know what the issue may be that you can't downgrade your switch, and if that is even supported.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 08, 2023 08:53 AM
From: AM87
Subject: SW 2930f Firmware Downgrade
Hi,
I've tried also from the Web interface, and at the beginning it starts the download and then it prompts an error for the upgrade.
In the TFTP the error prompts directly, but everything is fine during the transfer as it has been checked.
It might be due to the ROM version? The actual ROM is .0004 and the desired ROM for the downgrade is .0003
Original Message:
Sent: May 08, 2023 08:32 AM
From: Herman Robers
Subject: SW 2930f Firmware Downgrade
Does the Wrong file show up immediately? Or do you see the file downloading first?
If it is immediately, are you sure that the correct image is on your TFTP server?
Or can you try to upload the firmware through the web interface?
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
Original Message:
Sent: May 08, 2023 08:06 AM
From: AM87
Subject: SW 2930f Firmware Downgrade
hi,
the output error is the following:
Aruba-2930F-48G-740W-PoEP-4SFPP(config)# copy tftp flash 192.168.2.2 WC_16_03_00
05.swi secondary
The secondary image will be deleted.
Continue (y/n)? y
000M Wrong file.
Aruba-2930F-48G-740W-PoEP-4SFPP(config)#
I do need to downgrade for testing pourposes for an old equipment in customer dependencies.
thanks! :)
Original Message:
Sent: May 08, 2023 07:34 AM
From: Herman Robers
Subject: SW 2930f Firmware Downgrade
What is the error that you see?
Why would you want to downgrade to 16.03? Your 16.05.0009 is even almost 6 years old.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.