Wireless Access

 View Only
  • 1.  Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 11:10 AM
    Hello, 
    Can I upgrade directly to 8.8 from 8.6? Or do I have to upgrade to 8.7 first, and then to 8.8?
    I understand that it is ok to run MM's two versions higher than MCs in the network. But the release note does not state a minimum level to perform an upgrade from- e.g. from 8.6 to 8.8.

    I am running  two virtual MMs, and a cluster of HW MCs.


    Cheers

    ------------------------------
    Racingyacht
    ------------------------------


  • 2.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 11:36 AM
    If the Release Notes don't mention anything (I checked and I could not find anything, but there is something about memory in the Upgrade part of the release notes), you can go directly from 8.6.x.x to 8.8.0.1.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 3.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 11:44 AM
    Thank you for checking. I am going check availability of memory and storage as part of the pre-upgrade checkout.
    As you suggest I will check with TAC that going directly from 8.6 to 8.8 is okay, just to avoid problems.

    Cheers

    ------------------------------
    Racingyacht
    ------------------------------



  • 4.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 12:38 PM
    Racing,
    You mentioned about a max 2 version difference between software on the MMs and the MDs. Herman said there is no restriction on the maximum number of version differences between the MMs and the MDs.
    Thanks,
    Brad

    ------------------------------
    Brad
    ------------------------------



  • 5.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 01:51 PM
    Thanks Brad

    ------------------------------
    Racingyacht
    ------------------------------



  • 6.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 04:17 PM
    Agree with Herman that when there are no additional release notes you can go to 8.8.x.x in one step.

    One additional note is that's recommended to stay at the conservative (most stable) releases when ever you can, until there is some feature need or required hardware support in newer releases you need. At the moment the latest conservative release is 8.6.0.11.

    ------------------------------
    Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opionions are my own
    ------------------------------



  • 7.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 24, 2021 04:34 PM
    My apologies if I was unclear. There is a restriction of max 3 versions difference between MM and MD (8.6 on MD and 8.8 on MM is exactly that 3 versions).

    There is no restriction in that you need intermediates. So even an upgrade from 8.2 to 8.6 should work without the need of going through 8.3, 8.4, 8.5... And if your MD and MM were running 8.2, you should be able to (manual) upgrade all units to 8.6 in one go, without requiring intermediate upgrades. For cluster upgrades, the original and target firmware version have to be within the 3 versions, but that is the case as well for 8.8 to 8.6.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 8.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 25, 2021 07:17 AM
    Racingyacht, good morning

    I performed this update last week in our environment, the environment has two Mobility Conductor, two Mobility Controller 7220 and five hundred AP-515 model access points, I did the live upgrade successfully jumping from version 8.6 to 8.8, I followed the friend's advice @HR-abaef5 in his video available on the ABC Networking Youtube channel:

    https://youtu.be/G-H28nvnVOk


    ------------------------------
    Leonardo Xavier
    ------------------------------



  • 9.  RE: Upgrading to AOS 8.8 from 8.6

    Posted Aug 25, 2021 08:04 AM

    Thank you Herman and Leonardo for the information and great support. 

    I successfully upgraded to 8.8.0.1 last night. 


    Best



    ------------------------------
    Racingyacht
    ------------------------------